Products
Car washer product
Though type bus/truck wash machine（CB-750）
Description:
With 2 long brushes, 2 short brushes, 1 top brushes, total 5 nylon brushes.
Features:
High pressure water, shampoo
Equipment Parameter
| Name | full autoamtic drive thorugh type bus truck wash | |||||
| Model | CB-750 | |||||
| Technical data | overall dimension | 7420mm*5400mm*4400mm | ||||
| 7420mm*5400mm*5500mm | ||||||
| installation size | 8500*6000mm | |||||
| air source requirement | air pressure 0.75~0.9MPa（7.5~9kg/cm²） | |||||
| electric source requirement | AC 3 phase, 5-wire system, voltage: AC380V50Hz | |||||
| water source requirement | pipe diameter DN25 flow ≥120L/min | |||||
| ground flatness | Error≤10mm | |||||
| normal washing way | drive through type | |||||
| Available car to wash | Container,container truck, bus truck | |||||
| washing size （mm） | length（no limit）width≤3000 2800≤height≤3500 | |||||
| length（no limit）width≤3000 3900≤height≤4400 | ||||||
| Height of rearview mirror above ground≥1550mm | ||||||
| washing speed | 25-30 cars/h | |||||
| consumption | motor for short vertcial brushes | 0.75kw×2 | ||
| motor for long vertical brushes | 0.75kw×2 | |||
| water pump motor for brush group | 2.2kw | |||
| clean water pump motor | 1.5kw | |||
| side brush motor | 1.5kw | |||
| Maximum electrical capacity during operation | 8.2kw | |||
| Total electrical capacity | 8.2kw | |||
| consumption per car | water consumption | 180-240L/bus or truck | ||
| electric consumption | 0.15-0.25kwh/bus or truck | |||
| shampoo consumption | 20-25ml | |||
Equipment Advantages
1.With 2 long brushes, 2 short brushes, 1 top brushes, total 5 nylon brushes.
2.With pre-wash, shampoos, brushes wash, final rinse washing.
3.Bus roof, front, rear, both sides and chassis to wash.
4.PLC control systems&Touch screen pannel.
5. Trafic light on the machine to indicate the machine to readiness.
6.Proximity swith and photo sensors for activation of washing bus.
7.Water proof TLD brand motor on brushes.
8.All bearing and components with high end quality.
9. Hop-dip galvanized steel frame keep the whole machine antirust.
10.With one-site installation and operate training for free.
Equipment Parameter
| Light system | PLC control system made in Japan | Liquid automatic mixing system | Automatic Waxing spraying system |
 |  |  |  |
| Nylon/foam brush | Hot-dip galvanized steel frame | High pressure water system | Banner sensor |
 |  |  |  |
