Tunnel car wash machine(CC-695)
Description:
CC-695 is the second upgraded version of CC-690. 2 horizontal brushes and 3 drying brushes is added on the basis of CC-690. It is also the high-end tunnel car wash machine.
It can only wash the car quickly but also wash the car continuously. It washes 45-55 cars per hour. It greatly meet the needs of the customer who has very large business site and large car wash volume at the same time, meets the needs of the customer who needs not only to wash the car but also to wash the car wheels and dry the car with air dryer and drying brushes and the polishing function.
Features:
Pre-wash---high pressure water spraying--shampoo---brush washing---weak water spraying---wax spraying---air dryer
Equipment Parameter
Model | CC-695 | |||||
technical data | overall dimension | 16.38m*3.8m*3.44m | ||||
conveyor length 17.28m(including conveyor guide) | ||||||
installation size | 17.58m*4.0m | |||||
Voltage | AC380V 50Hz(5-wire system) | |||||
water resource | pipe diameter DN25 flow≥200L/min | |||||
air resource | pressure 0.75~0.9Mpa/flow≥0.1m³/min | |||||
ground flatness | Error≤10mm | |||||
cars to be washed | car\jeep\ van with less than 10 seats | |||||
car washing size | 5.3m*2.1m*2.1m(wheelbase≤3.2m) | |||||
car wash speed | 45-55car/hour | |||||
consumption | water consumption | 155L/car | ||||
power consumption | 0.8kwh/car | |||||
shampoo consumption | 20-40ml/car | |||||
wax consumption | 30ml/car |
functional configuration | shampoo system | one group | ||
wax system | one group | |||
hot-dipped galvanized steel frame | one group | |||
air drying system | one group | |||
high pressure water device | optional | |||
chassis spray system | optional | |||
swing air drying system | optional | |||
Intelligent device data | Management, checking, operation | |||
Self-diagnosis | Automatic fault display, self checking | |||
car entrance guide system | one group | |||
up-and-down lifting top brush | 1 | |||
short vertical brush | 4 | |||
fixed open and close long vertical brush | 2 | |||
2 | ||||
movable open and close long side brush | 2 | |||
side drying brush | 2 | |||
top drying brush | 1 |
Equipment Advantages
Various material washing, long washing time, good washing effect.
Low cost and more economical
Use high-resolution sensors, PLC control system, High safety.
One button washing, easy to operate
Automatic Liquid agent siphoning, easy to use
Dry the car according to its shape with good drying effect
Environmental friendly, low noise
Energy saving, water saving
Equipped with fault identification code, easy to identify and troubleshoot
Equipment Parameter
Japanese full automatic PLC control system.
Hot-dipped galvanized steel frame
V-shaped beam+single shaped bean/double V-shaped beam
14 brushes(1 lifting top brush+2 horizontal brushes+ 4 short vertical brushes+4 long vertical brushes+3 drying brushes)
Integrated guider at the entrance
Automatic conveyor
4 strong air dryer
High pressure water system
Wipe-free pre-wash system
Automatic shampoo proportioning system
Automatic wax proportioning system