Rollover car wash machine (CF-340)
Description:
CF-340 Rollover car wash machine is a highly cost-effective choice for rollover car washing. This car wash system is equipped with corrosion-resistant ZCF alloy bending frame; 4 sets of powerful and silent fixed blower dryer, with large blowing rate, high drying performance, low noise and eco-friendliness; low error rate, error code and cause display, convenient for troubleshooting.
Features:
High pressure water, shampoo,wax, drying.
Equipment Parameter
Rollover car wash machine | |
CF-340 | |
Overall dimension | 2.61m*3.6m*2.815m |
Rail: 9m*3.2m | |
Installation scope | 10870mm*4300mm*3200mm |
Voltage | AC380V50Hz |
Water-source requirement | Pipe diameter DN25 water flow≥80L/min |
Air-source requirement | 0.75-0.8Mpa |
Ground flatness | Error≤10mm |
Available car to wash | Light 4-wheeled vehicle, medium-sized car,coach within 7 seats |
Moving range | 5.2m*2.1m(outside mirror width)*2.1m |
Car wash capacity | One rollover 2ˊ58〞/ two rollover 4ˊ48〞 |
Water consumption | 75-115L/car |
Power consumption | 0.3-0.5kwh/car |
Shampoo consumption | 10ml/set |
Wax consumption | 15ml/set |
Short vertical brushes | 2 |
Long vertical brushes | 2 |
Top brush | 1 |
Water consumption | 75-115L/car |
Power consumption | 0.3-0.5kwh/car |
Shampoo consumption | 10ml/car |
Wax consumption | 15ml/car |
Frame | ZFC alloy steel hot-dipped galvanized steel frame |
Control system | MCU(Risense) |
Monitoring optoelectronic | Banner from the USA |
Proximity Switch | PEPPERL FUCHS from Germany |
Contactor | Schneider from France |
Solenoid valve | Pinguan |
Thermal relay | Schneider from France |
MCCB | Schneider from France |
Motor protector | Schneider from France |
Intermediate relay | Honeywell from the USA |
Elevating brake motor | SITI |
Brush rotating motor | SITI |
Equipment Advantages
Main Features:
Fully automatic MCU control system
Leaned vertical brushes to fit and cover the car.
Automatic foam and water wax mixing system.
Touch-screen control, user-friendly UI, convenient for car washing, system maintaining and data viewing.
Equipment Parameter
Advantages:
1). High efficiency silence dryer.
2). MCU control systems imported from Japan.
3). Automatic wax and foam formulating system.
4). Wax sprinkling system
5). Third generation foam brush.
6). Hot-dip galvanized frame without welding.
7). High pressure water systems.
8). The sensor from Japan.
9). The thin film operate panel with flame retardant and weather resistance.
10). The frequency converter made by Mitsubishi
11). Air cylinder made by Koganei
12). TLD Variable frequency motor